Product features:
1. Modular design of lamps and lanterns. lamps and lanterns, power supply and light source module assembly independently. Maintenance is convenient.
2. The shell of lanterns is made of aluminum alloy die-casting. appearance is smooth , light structure is firm.Surface coating and lamps and lanterns are high temperature and climate resistant. Optimizing performance and beautiful appearance .
3. Lamps and lanterns use tempered glass. High transparency and high strength.
4. Reflector lamps and lanterns is made of high purity aluminum forming,electrochemical polishing processing, high reflectivity.
5. The light source of lamps and lanterns is well-known brands at home and abroad high power LED chips. Light is reliable,high brightness, low light failure, Long lifespan.
6. wide input range, Constant current output.
Application scenarios:
Applicable to the urban main and branch roads ,residential areas,
industrial zones, pavements, squares, parks, schools, villas, gardens etc.
Product model and parameters:
|
model
|
H&H-LD30
|
|
power
|
30W
|
|
input voltage
|
DC12V/24V AC85V～264V
|
|
luminous flux Lm
|
2600-2700Lm
|
|
Center Luminance
|
（H=4m）≥25LUX
|
|
|
（H=6m）≥20LUX
|
|
|
（H=8m）≥15LUX
|
|
Irradiation area
|
（H=4m）15×6m
|
|
|
（H=6m）20×8m
|
|
|
（H=8m）26×10m
|
|
Color temperature K
|
2,800-7,000
|
|
CRI
|
＞75
|
|
power factor
|
＞90%
|
|
beam angle
|
lateral axis:120°， vertical axis:60°
|
|
host materials
|
Aluminum alloy + PC
|
|
lifespan
|
50,000H
|
|
operating humidity
|
10%～90%RH
|
|
operating temperature
|
-40℃～60℃
|
|
Lamp interface
|
E40
|
|
IP protection grade
|
IP60
|
|
net weight
KG
|
1.25kg
|
|
Size mm
|
Φ104 x 290
|
|
certification
|
CE/RoHS
|
H&H-LD30 LED路灯 平均光束角图 H&H-LD30 LED路灯认证图 H&H-LD30LED路灯光照图
announcements：
1. when you install or remove them,you have to cut the power off
2. Connect output line first, then the input line, Finally turn on the power .
3. When the power is on, don't touch any wire;
when the Power is off, can't contact output wires immediately.
4. Input and output line reverse connection will damage the ballast.
pay attention to the anode and the cathode of Dc electronic ballast input line.
5. Make sure that the ballast work under the environment of the prescribed parameters.
6. Refuse to use non-professional equipment measuring the unit.
This product strictly enforce the ISO9001 international quality management system standard production, Product quality assurance and provide technical support for three years.
|
