Product features
1. The wafer, pury chips encapsulation light source, high luminous efficiency, high color rendering index, low light failure, etc.
2. Built-in high-performance dedicated power LED lamps and lanterns, AC100 ~ 240 v input, efficiency > 87%, PFC > 97%,functions of constant pressure and constant current control, Over voltage, over load, over current protection, and lightning protection .
3. High thermal conductivity aluminum radiator, the high quality aluminum alloy electrical box, good heat dissipation, high strength, IP62 protection grade; small reflective cup concentrated, large reflectors gathers light reachs the ideal lighting effects.
4. Start speed is 1 to 3 seconds, no stroboscopic, anti-interference, contain no mercury and other harmful substances, energy conservation and environmental protection of green lighting.
Application scenarios
Used in workshop, cargo hold, exhibition center, shopping malls or supermarkets, gym, road toll station etc.
Product model and parameters
|
Model
|
Power
W
|
CRI
|
lighting effect
Lm
|
material
|
Irritation angle
|
weight
KG
|
life
H
|
|
H&H-CK30
|
30
|
≥70
|
70-80
|
aluminum alloy
|
120
|
3.2
|
35000
|
|
H&H-CK50
|
50
|
≥70
|
70-80
|
aluminum alloy
|
120
|
3.9
|
35000
|
|
H&H-CK80
|
80
|
≥70
|
70-80
|
aluminum alloy
|
120
|
6.5
|
35000
|
|
H&H-CK100
|
100
|
≥70
|
70-80
|
aluminum alloy
|
120
|
7
|
35000
|
|
H&H-CK120
|
120
|
≥70
|
70-80
|
aluminum alloy
|
120
|
7.5
|
35000
|
|
Chip: wafer / pury
|
|
power-supply efficiency >90%
|
|
2700-7000K
|
|
AC 90V~265V
|
LED luminous flux attenuation curve
1. LED decay curve datas above are got in environmental temperature
25 ℃, 24 hours interval lighting aging is measured after 1000 hours .
2. LED luminous flux attenuation is associated with using environment of lamps and lanterns. The higher the temperature, the longer you use, the faster the luminous flux attenuates.
photomatric data
Irradiation distance/illumination/exposure area
Install Caution
1. Please cut off the power before installation and ensure the installation position can withstand the weight of the lamps and lanterns.
2. In order to prevent the light off, please be sure to confirm the installation correctly.
3. Please don't use them where there is corrosive gas.
4. Please don’t cover any material on the lamp.
5. For the sake of safety, please connect the grounding line properly.
6. The quality assurance of this lamp is two years, starting from the acquisition date.
7. But the decomposition , modified or improper construction of our products are beyond the scope of this warranty.
|
